American-comfort ACW100 User Manual download pdf (Page 11)

When the water tank is full, the unit will switch off automatically and beep

15 times, the TANK FULL LED on the control panel will light up. The tank needs

to be emptied:

• Make sure unit is unplugged from power source

• Remove the water tank by pulling the clasp under the bottom.

• Empty the water tank.

• Push the water tank gently back in place. Plug the unit back into power

source. When done properly, the WATER FULL LED will turn off.

1. Do NOT remove the ﬂ oat sensor device from the water tank. If removed,

the water full sensor will no longer be able to detect the water level

correctly without the ﬂ oat and water may leak from the water tank.

2. If the water tank is dirty, wash it with cold or lukewarm water. Do not use

detergent, scouring pads, chemically treated dust cloths, as these can scratch

and damage the tank and cause water leakage.

3. When inserting the drainage tank, press the tank ﬁ rmly into place with both

hands. If the tank is not positioned properly, the sensor will still be activate,

and dehumidiﬁ cation can not operate.

Pull

Water

Tank

Float Sensor

Device

Emptying The Water Tank

1 2 ... 6 7 8 9 10 11 12 13 14 15 16 ... 27 28

No comments

American-comfort ACW100 User Manual Page 11